Picture
Picture
Rectangle
Spread Spectrum Fractional Capacity Radio Modem
Lynx sc Logo
  • Two independent data channels
  • V.11(V.35) interface 

  • (RS-232 or EIA-530 optional)
  • Full duplex, user-selectable synchronous data rates from 56 kbps to 512 kbps
  • Open network management
  • 2.4 or 5.8 GHz ISM band, license-free
  • FCC Part 15.247 and ETSI 300-328
  • Point-to-point communications to 80 km
  • Wide operational temperature -30 to +65oC
  • Full-featured: far-end monitoring, loopback, orderwire
Data Sheet as a PDF File
(includes LYNX.mini Fractional specifications)
Picture
LYNX.sc Fractional radio provides point-to-point wireless communications using spread spectrum technology. Certified under Part 15.247 of the FCC rules, any user (private, wireless service operator or government) may operate LYNX.sc in the U.S. and many other countries without a user license. LYNX.sc radios can be installed quickly and easily without time-consuming and expensive frequency coordination or licensing.

Available in either the 2.4 GHz or 5.8 GHz ISM band, the LYNX.sc Fractional capacity models provide full-duplex synchronous communications from 56 kbps to 512 kbps. The LYNX.sc family also offers single and multiple T1 
(1.544 Mbps) as well as single and multiple E1 (2.048 Mbps) full-duplex capacities in both the 2.4 and 5.8 GHz ISM band.

Two-Channels
Two separate full-duplex data channels are provided, each independently scalable by the operator. The total maximum capacity of the radio (both channels combined) is 512 kbps, depending on the operator's selection.

This unique feature results in lower cost per line to the user. It also provides flexibility to increase the capacity on both channels in the future, as demands grow. This feature can often relieve the need for external multiplexers.

Full-Featured
Built-in orderwire provides an easy means for private telephone connections between radio sites.

Open network management yields flexibility for operators with central equipment monitoring facilities.

The one-piece indoor design, loopback functions, flexible power connections and external adjustments result in a system that is easy to install and maintain. Also, wide temperature operation allows users to install LYNX.sc in outdoor cabinets or shelters without additional air conditioning or heating.

Applications
LYNX.sc radio modems are easily connected to voice, data or video sources. Wireless point-to-point link distances range from less than 1 km to more than 80 km line-of-site. Hub and repeater configurations are also easily configured.

Typical applications include rural telephone and remote data connections, such as Internet service provision or inter-building extensions of LAN or PBX systems.

Rectangle
Specifications
Model 31900 (2.4 GHz) Model 31950 (5.8 GHz)
Frequency Band 2400 - 2483.5 MHz 5725 - 5850 MHz
Output Power (at full power) >/= +27 dBm;+30 dBm, maximum >/= +20 dBm;+23 dBm, typical
RF Attenuation Control Range 16 dB, minimum 20 dB, minimum
System (Both Models)
Antenna Connector N-type female
Maximum Receive Level 0 dBm, error free; 
+10 dBm, no damage
Threshold (Ber=1x10-6) -95 dBm
Modulation QPSK
Coding Direct sequence
Number of Codes 4 (selectable)
Processing Gain 10 dB, minimum
Regulatory Compliance FCC Part 15.247 (Class B)
IC RSS-210/139; ETS 300-328
Digital Line Interface (Both Models)
Data Capacity (Input #1) Selectable: 56, 64, 128, 256, 512 kbps
Data Capacity (Input #2) Selectable: 64, 128, 256 kbps
Total Capacity (#1+#2) </= 512 kbps
Data Interface 
  Optional
V.35, Winchester (34-pin)
EIA-530 or RS-232 (selectable)
DB-25F
Far-end Loopback Local or remote control 
(Internal/external signal source)
All specifications subject to change without notice.
Auxiliary Connections (Both Models)
Orderwire Handset 2-wire, RJ-11
VF Orderwire Bridge 600 ohm balanced, 4-wire, 
0 dBm, DB25
Diagnostics Port RS-232/RS-422 (craft/TBOS), 
DB9
Aux Data Port
  (Clear Service Channel)
RS-232/RS-422, 
</= 9600 baud, DB9
Alarm Port 2 Form C, TTL, DB-25F
Protect Port RS-232, RJ-45
Test Points Output power, Near & far-end RSL
Power/Environment (Both Models)
DC Power +/-20 to +/-63 Volts, </= 45 Watts
Optional AC Adapter 100 - 250 Volts, 50 - 60 Hz
Power Connector 6-pin barrier strip, plug in
Operational Temp -30 to +65oC
Humidity 0 to 95% non-condensing
Altitude 15,000 ft (5,000 m)
Physical (Both Models)
Size (WxHxD)** 43.7 x 8.9 x 36.8 cm (2RU)
Weight 5 kg
Rectangle
Ordering Information
System
31900-1xxx
31900-2xxx
31950-1xxx
31950-2xxx
2.4 GHz, V.35
2.4 GHz, EIA-530
5.8 GHz, V.35
5.8 GHz, EIA-530
Diplexer
xxxxx-xA1x
xxxxx-xA2x
xxxxx-xC1x
xxxxx-xC2x
xxxxx-xE1x
xxxxx-xE2x
A1/B1 channel
A2/B2 channel
C1/D1 channel
C2/D2 channel
E1/F1/G1 channel+
E2/F2/G2 channel+
AC Adapter
31070
*19-inch (48.3 cm) EIA rack mount, 2-unit height (mounting brackets supplied).
+G-channels available only on model 31900
For questions or to place an order with an applications engineer call us at (408) 542-5200.
 FREE TRIAL - 30 day money-back guarantee on all qualified initial orders
Return to Glenayre Products Page